MFDC Spot Welding Machine

MFDC Spot Welding Machine

Details
The HFDB-100 is an MFDC spot welding machine developed for spot and projection welding of sheet-metal parts, brackets, fasteners and selected electrical components. It provides a maximum short-circuit current of 38 kA and can be supplied with electrodes and fixtures designed around the customer's material, joint geometry, strength requirement and production cycle.
Category
Spot Welding Machine
 
Add To Inquiry
Send Inquiry
Description
Technical Parameters

The HFDB-100 is an industrial resistance welder that uses a medium-frequency inverter power source and rectified DC output. It is intended for components whose required welding current, electrode force and production rate fall within the verified process range of the machine.

The machine can be configured for two main joint types:

  • Overlap spot welding of sheet-metal components;
  • Projection welding of nuts, bolts and formed projections.

It can also be evaluated for selected wire, terminal and electrical-contact joints. Suitability is determined from the actual material, thickness, contact area and required weld strength rather than the material name alone.

 

mfdc-spot-welding-machine-for-busbar.

 

Why Use MFDC for Spot and Projection Welding?

 

Controlled DC Welding Output

Medium-frequency inverter control allows the welding schedule to be adjusted for the joint and material. The rectified secondary output avoids the alternating-current zero crossing found in conventional AC resistance welding.

01

Suitable for Spot and Projection Joints

The HFDB-100 can be configured for overlapping sheet joints as well as fasteners with designed welding projections. This makes it suitable for manufacturers producing brackets, structural sheet-metal parts and nut or bolt assemblies.

02

Custom Electrode Arrangement

Electrode shape affects current density, force distribution, heat balance and access to the joint. HAIFEI develops the upper and lower electrode arrangement around the actual component instead of using one standard electrode for every application.

03

Fixture-Based Part Location

Projection welding requires reliable control of the fastener position, part flatness and electrode alignment. A dedicated fixture can be designed to locate the sheet and fastener before the welding cycle begins.

04

Integration with Production Equipment

The HFDB-100 can be supplied as a stand-alone workstation or configured for connection with feeding, indexing, safety and production-control equipment. Available signals and communication functions depend on the selected controller.

05

 

electrical contact resistance welded by HFDB-100
	flange nut projection welded to carbon steel bracket
MFDC spot welded galvanized steel sheet sample

 

Request sample welding

 

 

Technical Specifications

 

Specification Unit HFDB-100
Rated Capacity kVA 2 × 80
Standard Power Supply V/Phase/Hz 380/3/50
Maximum Primary Current A 100
Primary Cable mm² 3 × 25 + 2 × 16
Maximum Short-Circuit Current kA 38
Rated Duty Cycle % 20
Secondary Voltage V 9
Cooling-Water Consumption L/min 25

 

Haifei Welder Core Components 

More Professional Technology. Our self-developed controller, backed by national software copyright certification, offers advanced features including data traceability of up to 1 million records, adjustable current and pressure upper/lower limits with real-time monitoring, ensuring precise process control and stable production.

The transformer is independently manufactured using German integral casting technology for enhanced durability and performance. Additionally, the system integrates AI-powered intelligent detection, delivering superior accuracy and efficiency. Designed for high-performance applications, this MFDC spot welding machine exemplifies innovation and reliability in industrial welding solutions.

medium frequency DC spot welder control interface
 

If you are facing the following problems, this machine is designed for you!

Is the product too conductive?

Is the current from traditional welding machines unstable, leading to weak copper busbar welds?

High appearance requirements?

Is the welded surface blackened or severely deformed, resulting in high secondary processing costs?

High scrap rate?

Is the weld strength inconsistent, failing tensile tests?

High grid pressure?

Is the instantaneous current from traditional welding machines causing frequent power outages in the factory?

 

Industry Applications

 

Haifei not only sells machines, but also provides process solutions.

 

Industry Welding products
Power Distribution & ESS

 

  1. Rigid Busbars: Overlapping spot welding of copper plates to copper plates and aluminum plates to aluminum plates.
  2. Flexible Connectors: Welding of copper foil stacks to copper terminals.
  3. Switchgear Assembly: Welding of conductive busbars and contacts inside circuit breakers.
  4. Energy Storage Cabinet Busbars: High-current transmission busbars inside energy storage containers.

 

EV & Automotive Parts

 

  1. Power Battery Pack: Welding of battery module acquisition lines (NTC harness) to busbars.
  2. Electric Drive System: Precision welding of motor stator leads to terminals.
  3. Automotive Body Panels: Seamless or micro-spot welding of high-strength steel plates and galvanized sheets.
  4. Charging Pile Core Components: Conductive connectors for the internal DC fast charging module.

 

Low-voltage Electrical & Electronics

 

  1. Relays and contactors: Composite welding of silver contacts to copper supports.
  2. Precision sensors: Micro-spot welding of sensor housing and internal metal pins.
  3. Miniature motors: Hook-shaped spot welding of rotor windings and commutator.
  4. Thermostats: Precision spot welding of spring sheets and contacts.

 

Home Appliances & Hardware

 

  1. Stainless steel kitchenware: Sealing spot welding for oven liner, dishwasher drum, and microwave oven cavity.
  2. Small appliance components: Electric kettle heating plate base, electric iron internal connectors.
  3. Hardware furniture: Cross-spot welding of stainless steel pull-out baskets and storage shelves.
  4. Compressor parts: Welding of internal brackets and junction boxes for refrigerator/air conditioner compressors.

 

 

 

One-stop service 

 
  1. Contact us now for a free process evaluation
  2. Submit your workpiece drawing or process requirements
  3. Get a custom welding solution and quote
  4. Arrange a sample production service

Microcomputer Control

Save electricity over 30%

Electric Cylinder

Nut projection welding available

Brand Components

High stability

High-quality Welding

Strong and beautiful welding surface

 

Contact our engineers

 

 

FAQ

 

 

MFDC Spot Welding Machine

01.What makes MFDC superior to traditional AC welders?

The MFDC system provides 20x higher current precision, ensuring stronger welds while reducing energy consumption by 30% and eliminating power grid tripping.

02.Is this MFDC Spot Welding Machine capable of welding high-conductivity materials like copper and aluminum?

Yes. The rapid DC discharge technology is specifically designed for copper busbars and aluminum sheets, ensuring deep penetration with minimal heat loss.

03.How difficult is the machine to operate for new workers?

It is highly intuitive. Featuring a smart PLC touchscreen with programmable presets, operators can be fully trained and production-ready within 15 minutes.

04.Can the machine be customized for uniquely shaped workpieces?

Absolutely. We provide tailor-made solutions, including custom electrodes, adjustable throat depths, and automated fixtures based on your specific drawings.

05.How long do consumables like electrode tips last?

The stable DC output significantly reduces electrode erosion, doubling the lifespan of tips compared to standard AC models and lowering maintenance costs.

 

 

Wuxi Haifei Intelligent Equipment Co., Limited is one of the leading manufacturers and suppliers of mfdc spot welding machine in China. With abundant experience, we warmly welcome you to buy advanced mfdc spot welding machine for sale here from our factory. Quality products and reasonable price are available.

 

Hot Tags: mfdc spot welding machine,medium frequency DC spot welder,MFDC resistance welding machine,MFDC spot and projection welder, tab spot welder, spotter welder, mini portable battery welding machine, battery tab spot welding machine, accurate spot welding machine, table top spot welder

Send Inquiry

Start Your Welding Machine Project with Haifei

Share your workpiece drawing, material, welding position, required output, and quality requirements. Haifei will review your welding process and recommend a suitable busbar welder, resistance welder, or customized automation solution.

Contact Our Engineer