Products Description
150QY Pneumatic and Hydraulic Busbar Welding Machine for Copper Flexible Busbar
The 150QY is a high-performance busbar welding machine that combines pneumatic and hydraulic power to deliver precise, robust, and efficient welds for copper and aluminum busbars. It utilizes advanced diffusion welding technology, applying controlled pressure and heat without melting the base metal, ensuring optimal electrical conductivity and mechanical strength.
Equipped with a PLC controller and touch-screen interface, it offers user-friendly operation and consistent results. Ideal for electrical manufacturing, power distribution systems, and renewable energy applications, this machine enhances productivity, reduces energy loss, and guarantees reliable, high-integrity connections critical for industrial use.
Main Parts

MAIN PARTS
| 1 |
Transformer |
| 2 |
Air Liquid Booster Cylinder |
| 3 | PLC controller |
|
Touch Screen, Control Circuit |
|
| 4 | IInverse Circuit |
|
IGBT, SCR, Switches |
|
| 5 |
COpper Connection Strip And Copper Plate |
| 6 |
Upper And Bottom Welding Platform |
| 7 |
Cooling Water Circuit And Protection Circuit And Prrotection Circuit |
| 8 |
IInfrared Temperature Detection System |
| 9 |
Body frame |
| 10 |
Down-to-earth switch |
| 11 |
Graphite block |
Actual welding capacity depends on the foil grade, individual foil thickness, total stack thickness, bonding-area dimensions and required electrical or mechanical acceptance standard.
Welding Effect
Busbar Welding Machine-Welding Effect Display
copper busbar



What Is the HFTD-150-QY Designed to Weld?
The HFTD-150-QY is intended for conductive components made from multiple layers of copper foil. It is not a general-purpose machine for every type of rigid copper busbar.
Laminated Copper Foil Flexible Busbars
The machine can bond the ends of stacked copper foils to form a compact connection area while the middle section remains flexible. The bonded end can then be drilled, punched or connected to another conductive component according to the finished product design.
The final compacted width, thickness and length are determined by the product drawing and graphite tooling. Sample testing is required because copper foils with the same total thickness may behave differently when the individual foil thickness or number of layers changes.
EV Battery and Energy Storage Connectors
Flexible copper busbars are used between battery modules, battery packs, inverters and other conductive assemblies where movement, vibration or installation tolerance must be accommodated.
For these products, the welding process must be evaluated according to the required bonding area, resistance value, surface appearance and subsequent punching or assembly process. The HFTD-150-QY may be suitable for smaller and medium-sized bonding areas within its pressure and working-space limits.
Switchgear and Transformer Flexible Conductors
The machine can be evaluated for laminated copper connectors used in switchgear, transformers, distribution cabinets and other power equipment.
When the product must carry high current, machine selection should not be based only on the external busbar size. The bonded area, total foil thickness, required temperature rise and customer inspection standard also affect the welding process.
Copper-to-Nickel Conductive Parts
Selected copper foil and nickel-sheet assemblies can be tested when a nickel contact or nickel layer is required at the connection end. Material thickness, surface coating, overlap design and bonding-area dimensions must be reviewed before the process is confirmed.
Copper-to-nickel applications should not use copper-to-copper welding parameters without testing.
Product Overview

The HFTD-150-QY is a high-performance busbar welding machine specially designed for copper busbar and electrical connection applications. With a rated capacity of 150KVA and 50% duty cycle, it delivers efficient and reliable welding performance under continuous industrial operation.
Operating on a standard 380V±10%, 3-phase, 50Hz power supply, the machine requires a maximum primary input current of 200A, supplied through a 3×30+2×16 mm² cable. It generates a secondary short-circuit current up to 40KA with an open-circuit voltage between 7.5‒9.7V, ensuring strong and consistent welding energy output.
The transformer is insulated to Class F standards, guaranteeing durability and safety. The cooling system demands water at 0.2~0.3 MPa pressure, filtered to 40 microns, with resistivity of 5 kΩ·cm and flow rate of 50 L/min at temperatures ≤30°C.
Equipped with a Ø160×120mm air-liquid booster cylinder, the welder offers a maximum working pressure of 100KN and a throat depth of 320mm. It supports a maximum welding area of 60×60 mm with stack thickness up to 20mm, making it ideal for heavy-duty electrical welding tasks.
Suitable for operating environments between 1~45°C and 20~80% relative humidity, the HFTD-150-QY ensures stability and reliability across various industrial conditions.
Ideal for power distribution, rail transit, renewable energy, and industrial electrical applications.

FAQ
Q: What copper foil thickness can the HFTD-150-QY weld?
A: The suitable thickness depends on the individual foil thickness, number of layers, total stack thickness and bonding area. Send these details with the drawing for process evaluation.
Q: How many copper foil layers can be welded in one cycle?
A: There is no universal layer limit. Thin-foil stacks and thick-foil stacks transfer heat differently, so the layer quantity must be evaluated together with the foil thickness and required bonded area.
Q: Can the machine weld a full 60 × 60 mm copper area?
A: The machine has an effective welding area of up to 60 × 60 mm, but suitability still depends on the stack thickness, copper condition, required pressure and acceptance standard. Sample testing is required near the maximum range.
Q: What is the difference between a pneumatic-hydraulic and hydraulic diffusion welder?
A: A pneumatic-hydraulic system uses compressed air for movement and an intensifier section to generate higher welding pressure. A hydraulic system is generally more suitable for larger areas, higher pressure and heavier tooling.
Q: Does the machine require a water chiller?
A: Yes. The machine requires a stable cooling-water supply and should not be operated without cooling. A suitable industrial chiller is required when the factory does not have an adequate cooling tower or circulation system.
Q: How long does one copper busbar welding cycle take?
A: The cycle depends on the bonding area, copper thickness, heating time, holding time and cooling requirement. For a 150 kVA machine, some products may require approximately one to two minutes, but the actual time must be verified by testing.
Wuxi Haifei Intelligent Equipment Co., Limited is one of the leading manufacturers and suppliers of busbar welding machine in China. With abundant experience, we warmly welcome you to buy advanced busbar welding machine for sale here from our factory. Quality products and reasonable price are available.
Hot Tags: busbar welding machine, China busbar welding machine manufacturers, suppliers, factory, diffusion welding machine, diffusion welder for copper, Hydraulic Diffusion Welding Machine, , , diffusion welding machine price

