The operating methods of diffusion welding machine mainly include the following steps:
Preparation:
Check whether each component is working properly, including air pressure valve, ammeter, etc.
Open the compressed air and cooling water circulation system to confirm that there is no air leakage or water leakage.
Check that the power wiring is correct and ensure that the voltage is normal.
Set process parameters:
Set the appropriate temperature and pressure according to the welding material. For example, the welding temperature of copper is about 580 to 680℃, the pressure of copper is about 10Mpa, and the pressure of aluminum is about 5Mpa.
Adjust process parameters such as temperature and pressure to ensure the welding effect.
Start welding:
Turn on the power switch and adjust the position.
Welding, pay attention to whether each indicator light is working properly.
Adjust parameters according to actual conditions during welding to ensure welding quality.
Subsequent processing:
After welding, turn off the power switch and wait for the equipment to cool down.
Check the welding effect and adjust the parameters to re-weld if necessary.
