Capacitor Discharge Spot Welder for Nut Welding

Capacitor Discharge Spot Welder for Nut Welding

Details
The HFTR-5000 is a press-type capacitor discharge resistance welder for projection welding weld nuts, weld bolts and selected threaded fasteners to sheet-metal parts. Its short energy-release cycle concentrates heat at the designed projections. Final machine suitability depends on fastener geometry, material, coating, sheet thickness, electrode access and the required strength test.
Category
Capacitor Discharge Welding Machine
 
Add To Inquiry
Send Inquiry
Description
Technical Parameters

Haifei capacitor discharge spot welder is designed for fast nut projection welding, stud welding, and small metal part welding where short weld time, low heat input, and stable weld strength are required. The HFTR-5000 model stores up to 5000 Joules of energy and releases it within a short welding cycle, making it suitable for hot-stamped steel, high-strength steel, automotive safety parts, battery pack brackets, and selected fastener welding applications.

For customers welding nuts, studs, or threaded fasteners onto metal sheets, the main concern is usually not only whether the weld can be formed, but whether the nut position, thread condition, pull-out strength, torque result, and part appearance can remain stable in production.

Haifei can evaluate the customer's nut size, projection shape, base material, sheet thickness, weld position, strength requirement, and production cycle before recommending the final welding setup.

Capacitor discharge spot welder with branded components, cylinder, electrode and microcomputer control

HFTR-5000 capacitor discharge spot welding machine for nut and fastener welding

Capacitor discharge spot welding samples for automotive parts, nuts, brackets and metal components

 

Product advantages and selling points

 

HFTR-5000 Capacitor Discharge Spot Welder for Nut Welding

5000J Energy for Controlled Local Welding

The HFTR-5000 is suitable for controlled local welding of selected nuts, studs, fasteners, and small metal parts. Its 5000J stored energy is designed for applications that need a fast energy release but do not require the larger output range of higher-energy capacitor discharge welders.

Short Welding Time for Lower Heat Spread

The welding time is typically within a few milliseconds. Because the heat is concentrated at the weld area, the surrounding base material receives less thermal impact than in slower heating processes.

Suitable for Small and Medium Nut Welding

The machine is suitable for selected small and medium nuts, studs, pins, and threaded fasteners. It can be used for automotive brackets, safety-related metal parts, battery pack brackets, and small stamped components.

Helps Reduce Spatter in Suitable Applications

Capacitor discharge welding can help reduce spatter when welding energy, pressure, electrode contact, and workpiece surface condition are properly matched. This is especially helpful for parts where surface cleaning, thread protection, and appearance control are important.

Welding Data Recording for Traceability

The machine supports welding data storage, which is useful for production review and process traceability. For automotive fasteners, safety-related parts, or batch production, recorded welding data can help customers check parameter consistency and review production conditions.

Compact Solution for Fastener Welding Cells

Compared with larger capacitor discharge welding systems, this model is more suitable for compact welding stations or medium-duty fastener welding cells. It can be used as a stand-alone welding machine or combined with a fixture, nut positioning device, sensor detection, or simple automation module.

 

Product Specifications

 

 

Items \ Model unit HFTR-5000
Capacitor volume uf 10000
Power supply KVA/V/Hz 10/380/50
Rated duty cycle % 50%
Primary current Max. A 30
Primary cable mm2 3*10+2*6
Short-circuit current Max. KA 18
Secondary voltage V 10-12
Air pressure cylinder Ø*L Ø160*110
Working pressure Max. (0.5/10.5MPa) KN 10
Working environment   temperature: 1~45℃ humidity: 35~90%

 

Typical Applications

 

Nut Welding on Hot-Stamped Steel Parts

The machine can be used for selected nut welding applications on hot-stamped steel parts. Since hot-stamped steel may be sensitive to excessive heat input, sample welding is recommended to check weld strength, material condition, and heat effect.

01

Automotive Fastener Welding

It is suitable for welding nuts, studs, pins, and threaded fasteners onto small automotive metal parts, brackets, reinforcement plates, safety components, and stamped parts.

For these parts, customers usually care about nut position, thread condition, pull-out strength, torque performance, and welding consistency.

02

Battery Pack Brackets and Small NEV Components

The HFTR-5000 can be evaluated for battery pack brackets, small mounting plates, and selected new energy vehicle metal components that require fast localized welding and controlled heat input.

03

Appliance and Hardware Fastener Welding

The machine can also be used for appliance brackets, hardware clips, mounting plates, small stamped parts, and metal assemblies where nuts or studs need to be welded quickly and repeatedly.

04

Process Testing for Special Materials

For high-strength steel, galvanized sheet, plated parts, and selected copper or aluminum parts, Haifei recommends sample welding before final machine confirmation. Material surface condition and coating can affect welding stability.

05

 

Detailed images of the HFTR-5000 Capacitor Discharge Spot Welding Machine

 

Branded Components

Branded Components

Cylinder

cylinder

Electrode

electrode

Drainage Device

Drainage device

 

 
 

Product Advantages & Customer Benefits

 

Customer Pain Points

Our Solution

Customer Benefits

1 High deformation & risk of hardening cracks when welding hot-stamped steel. Millisecond heating with extremely low heat input. No workpiece deformation, material's high strength preserved, zero crack risk.
2 Traditional welding causes spatter, requiring post-weld slag cleanup, hurting efficiency & appearance. Spatter-free welding process. Eliminates cleanup step, increases line cycle time, delivers clean product finish.
3 Insufficient nut weld strength requires extra tapping to ensure thread integrity. Weld strength exceeds base material, creating a "metal button" mechanical interlock. Eliminates tapping entirely, simplifies process, saves cost, enhances structural reliability.
4 Weld quality unstable due to grid fluctuation, electrode wear; poor consistency. Closed-loop energy-based control with auto-compensation. Extremely stable weld quality, reduces operator dependence, enables "zero-defect" production.

 

cooperative partner

 
 
TATA.jpg
 2.jpg
.png
.png
.jpg
.jpg
.jpg
.jpg
.png
.jpg

Certifications

Haifei Welding Technology Co., Ltd. is a National "Little Giant" Enterprise specializing in sophisticated and unique technologies.

haifei.png
haifei welding.jpg
flexible welding haifei.jpg
copper bsubar welding haifei.jpg
resistance welding CE.png
DIFFUSION WELDING SYSTERM.jpg
 

 

Haifei Customer Site

 
Turkish Customers Visit Haifei Factory For Inspection
Turkish Customers Visit Haifei Factory
Russian Client Visits HAIFEI For Silver Contact Welding Machine
Russian customers visit Haifei factory
Malaysian Client Conducts On-Site Acceptance Of Fully Automatic Copper Braid Cutting And Squaring Machine
Malaysian customer accepts equipment
Kazakh Client Visits HAIFEI For Custom Auto Parts Welder
Kazakhstani customers visit Haifei factory
Indian Client Visits HAIFEI For Aluminum Diffusion Welder Evaluation
Indian customers visit Haifei factory
HAIFEI Aluminum Welder Impresses International Visitors
International clients visit Haifei factory
HAIFEI Welding Equipment Successfully Packed And Shipped To Tunisia
Tunisian customers visit Haifei factory
German Customers Visit Haifei Factory For Welding Equipment Inspection
German Customers Visit Haifei Factory
HAIFEI Successfully Ships 16 High-Performance Diffusion Welding Machines To India
Haifei delivers equipment to India
HAIFEI Seam Welding Machine Gains High Recognition From European Client, On-Site Technical Cooperation Intention Reached
European customers visit Haifei factory

 

Why Choose Us?

 

 

In the field of automotive safety welding, where extreme reliability is paramount, we are your trusted partner.

  • Technical Depth: 12 years focused on CD welding tech, with full in-house R&D capabilities from capacitors/thyristors to control algorithms.
  • Process Database: Over 1000 mature welding parameter packages for various material combinations (hot-stamped steel, HSS, aluminum, etc.), giving you a head start.
  • Automotive Industry Access: Our equipment and processes are approved by major OEMs, meeting stringent IATF 16949 requirements.
  • Full Lifecycle Service: From pre-sales process feasibility analysis to after-sales spare parts and tech updates, we provide deep support throughout your machine's life.

 

 

Core Value-Added Services

 

 

Free welding process development & sample validation

On-site installation, commissioning & operator certification training

Lifetime free welding parameter package upgrades

1-year remote monitoring service via "Haifei Cloud" platform (optional)

 

FAQ

 

 

 

HFTR-5000 capacitor discharge spot welding machine for nut and fastener welding

01.What nut sizes are suitable for this capacitor discharge spot welder?

It is suitable for selected small and medium nuts, studs, and fasteners. The final suitability depends on nut size, projection design, sheet thickness, welding force, and required strength test.

02.How do you ensure welding doesn't compromise the original high strength of hot-stamped steel?

Hot-stamped steel's strength comes from its martensitic structure; excessive heat can temper it back. Our millisecond discharge process precisely controls heat input to form a nugget without causing large-scale tempering, perfectly preserving base material strength.

03.What is the lifespan of key consumables (e.g., electrodes)? Is replacement costly?

Due to the extremely short weld time, electrode thermal load is very low. We use special copper alloy electrodes with a lifespan exceeding 300,000 welds under standard conditions. Electrodes are standard-design, easy and inexpensive to replace.

04.Can it be integrated into automated production? How does it communicate with robots/PLCs?

Absolutely. Standard interfaces include Digital I/O (24V) and Industrial Ethernet (Profinet/Ethernet IP), enabling easy integration with robots, PLCs, and MES for fully automated handling, welding, and data upload.

05.Are there special requirements for workshop power grid or compressed air?

Requirements are low. Due to intermittent charging, grid impact is much lower than continuous welders. Only standard AC 380V±10% power and clean compressed air at 0.5-0.7MPa are needed.

06.If the product model changes, do we need to redevelop welding parameters?

For the same material combination with different nut/sheet sizes, usually only fine-tuning of existing parameters is needed. Our smart parameter estimation software assists with quick setup. For entirely new materials, we offer free process development.

 

 

Wuxi Haifei Intelligent Equipment Co., Limited is one of the leading manufacturers and suppliers of capacitor discharge spot welder for nut welding in China. With abundant experience, we warmly welcome you to buy advanced capacitor discharge spot welder for nut welding for sale here from our factory. Quality products and reasonable price are available.

 

Hot Tags: Capacitor Discharge Spot Welder for Nut Welding, China Capacitor Discharge Spot Welder for Nut Welding manufacturers, suppliers, factory, Capacitor Discharge Spot Welder For Three Way Catalytic Converters

Send Inquiry

Start Your Welding Machine Project with Haifei

Share your workpiece drawing, material, welding position, required output, and quality requirements. Haifei will review your welding process and recommend a suitable busbar welder, resistance welder, or customized automation solution.

Contact Our Engineer